Short Stop and Soft Stop for all Electric Downriggers

Short Stop is a Cannon exclusive feature that automatically stops the weight at the water’s surface, preventing the lift motor from raising it into the pulley at the end of the boom. When the downrigger cable is in the water, a small electrical current flows between the cable and grounded metal boat components in the water. When the cable clears the water, the current flow stops. The short stop system senses this interruption and turns off the motor. The trolling weight insulator is used to break the cable contact to the water while the weight is still in the water. Stopping the weight at water level eliminates the cable strain caused by a bouncing weight or a weight hitting the boom end and it also keeps the weight from swinging into the boat hull. This feature comes on all Cannon electric downriggers and requires conductive cable and the boat to be properly grounded.

 

Was this article helpful?
23 out of 36 found this helpful

Articles in this section